| February 2010 Newsletter
NEW RELEASE: Low-Profile Bolt & Washer Combo for the GTC-300 and GTC-500 Wings
Bolt and washer combo
Announcing the all-new,
low-profile APR bolt & washer combo for wing side plates (or
many other applications, such as license plate holders and
engine bay dress-up). Measuring a mere 3.00mm
(thickness) x 20.0mm (diameter), the washer is designed with a
cavity that allows the bolt to sit completely-recessed within
the washer.
Bolt and washer combos installed on the
GTC-500 GT-R R35 side plate
The new bolt & washer
combo is 33% lower-profile than the previous generation pieces,
and is now included with all GTC-300 and GTC-500 wings. Made of rust-proof stainless steel, these are built tough and
will last a lifetime in all weather environments.
Bolt and washer combo (bolt head and rubber o-ring sandwiches
the washer to keep the whole assembly together for easy
installation)
Stainless Steel M6 Bolt
& Washer for Wing Side Plate (set of 4 Part # AA-104206 $15.00
Click here to find out more about APR
Wing Accessories
back to top
AVAILABLE NOW:
Hyundai Genesis - Complete Aero Kit
Hyundai Genesis Coupe with Complete Aero Kit
If you have a Hyundai Genesis Coupe and want
to subtract seconds off your lap times at the track, then don't
miss out on APR's full aero-kit for this car.
Have you ever worried about experiencing
excessive understeer because you've only mounted a rear wing to
the car? Those that have experienced it will tell you that
it's no fun when they execute turn-in with the steering wheel
only to find out that the car doesn't want to turn-in!
Remember, balance is a critical component in
setting fast lap times. If your car is already
mechanically well-balanced, then doesn't it make sense to also
make your car aerodynamically well-balanced?
The complete aero kit consists of:
1. Carbon Fiber Front Air Dam #
FA-602006
2. Carbon Fiber Front Wind Splitter
# CW-200508 (optional)
3. Carbon Fiber Side Rocker
Extensions # FS-603408
4. GTC-300 61" Carbon Fiber
Adjustable Wing # AS-106106
These aerodynamic components (except for item
2, which uses a different process) are produced using pre-preg.
carbon manufacturing processes. The parts are
vacuum-bagged with high-quality molds and formed inside a
autoclaves at high temperatures. After removal from the
autoclave, each part is cleaned up, then coated in
UV-stable clear-coat paint for fade-resistance under the sun.
Hyundai Genesis Coupe with Complete Aero Kit
Call us now to purchase a complete aero
kit for your Hyundai Genesis Coupe! Direct Sales Line
(909) 594-3796
Click here to find out more about
APR's Hyundai Genesis Coupe vehicle specific aero products
back to top
AVAILABLE NOW:
Lotus Exige - Complete Aero Kit
Lotus Exige with Complete Aero Kit
We all know that the Lotus Exige
already comes from
the factory as a very-well balanced track machine, ready to
slice through corners with razor-sharp precision and set some
great lap times straight out of the box.
But, just like most other
"(insert your favorite product here)-in-a-box" deals, to extract
even more performance out of your machine, you've got to make
some...upgrades.
For the Lotus Exige, APR has a complete aero
kit that will help you maximize performance and set your
personal bests at your favorite track.
The complete aero kit consists of:
1. Carbon Fiber Front Air Dam #
FA-200311
2. Carbon Fiber / Nomex Honeycomb
Front Wind Splitter # HCW-272224 (optional)
3. Carbon Fiber Front Bumper Canards #
AB-200311
4. Carbon Fiber Side Rocker
Extensions # FS-200211
5. GTC-200 Carbon Fiber
Adjustable Wing # AS-105915
These aerodynamic components are produced using pre-preg.
carbon manufacturing processes. The parts are
vacuum-bagged with high-quality molds and formed inside a
autoclaves at high temperatures. After removal from the
autoclave, each part is cleaned up, then coated in
UV-stable clear-coat paint for fade-resistance under the sun.
Call us now to purchase a complete aero
kit for your Lotus Exige! Direct Sales Line
(909) 594-3796
Click here to find out more about
APR's Lotus Exige vehicle specific aero products
back to top
IN DEVELOPMENT:
Rear Diffuser for the 2005-Up Chevrolet Corvette C6 / C6 Z06
Rear Diffuser mock-up installed on a C6 Z06
If you're a C6 or C6 Z06
owner, and whether or not you already have some of our other
awesome corvette products (Front Air Dam, Side Rocker
Extensions, Rear Spoiler, or Rear Wing), this upcoming Rear
Diffuser product is one that you cannot miss out on.
Pictured here is our
completed mock-up part. The center section starts out
flat, then kicks up at 5 degrees to meet with an exhaust
opening. The two side sections kick up at 14 degrees then
finally to 53 degrees for a functional and aggressive look.
2 outside and 2 inside vertical fins act as guides to keep the
air flow moving in the right direction.
We are not taking orders
just yet, but rest assured - we are putting this product into
production soon enough. The mock-up part is being used to
create a mold that will allow us to produce these rear diffusers
using pre-preg. carbon fiber manufacturing processes.
After the 1st production sample arrives and is successfully test-fit,
we will begin taking orders. So stay tuned for more
updates!
Rear Diffuser mock-up installed on a C6 Z06
Click here to
find out more about APR's C6 vehicle specific aero products
back to top
JUST COMPLETED:
Rear Spoiler for the 2005-2009 Ford Mustang GT-R Widebody Kit
1st production sample of the Rear Spoiler installed on our
APR GT-R Widebody project vehicle
If you've got (or plan to
get) our widebody kit for the S197 Mustang, but felt like a
GTC-500 wing was too much for street use, then we now have the
perfect solution for you! We've successfully test-fitted
our 1st production sample of our new Rear Spoiler for the APR
widebody kit, and we absolutely love how it looks (so much, in
fact, that we may just want to keep the spoiler attached in
place of the massive GTC-500 wing we had on the car previously)!
1st production sample of the Rear
Spoiler installed on our
APR GT-R Widebody project vehicle
This spoiler is made of
pre-preg. carbon fiber materials and finished with UV-resistant
clear coat paint. Lightweight, strong, and designed to
look great, we feel that this part is a must-have for those who
choose not to run the GTC-500 wing with this widebody kit.
We are moving full-steam ahead with production. Now is the
time place your order!
Rear Spoiler product photo
Rear Spoiler for the
2005-2009 Ford Mustang S197 GT-R Widebody Kit # AS-106550 $750
We are taking pre-orders
now! Direct Sales Line
(909) 594-3796
Click here to
find out more about
the Rear Spoiler for the Ford Mustang S197
GT-R Widebody Kit
back to top
|
